Knoxville Yacht Sales

AB Inflatables Lammina 14 AL

  • 14.00 ft
  • Inflatable


Lammina is the first line of marine-grade, aluminum-hull inflatables to reach the U.S. market. The Superlight models, available in lengths 9,5 feet and under, feature a 2,28mm (0.090”) aluminum hull. The rest of the line, available in lengths 10 feet and larger, sports a 3,17mm (0.125”) aluminum hull. The transom thickness on models 8 to 10 feet is 3,17mm (0.125”) and from models 11 to 16 feet is 4,7mm (0.190”). These tough, lightweight and durable aluminum hulls will resist abrasions from rocky shores, coral and sandy beaches. The innovative design of the Lammina series cuts through wakes and chop with far less pounding. The result is an exceptionally dry, stable and superior ride.

  • Overall Length: 14' / 4.27m 
  • Overall Beam: 6' 7 " / 2.00m 
  • Inside Length: 10' 10" / 3.30m 
  • Inside Beam: 3'3'' / 0.99m 
  • Tube Diameter: 19" / 0.48m 
  • Number of Chambers: 4 
  • Person Capacity: 8 
  • Weight: 246lb / 112kg 
  • Recommended HP: 30 hp / 22.4 kw 
  • Maximum HP: 40 hp / 29.8 kw 
  • Shaft Length: 20" / 50.8 cm 
  • RDC Design Category: C



Basic Information

AB Inflatables
Lammina 14 AL
Boat Type:
Hull Material:
Hull Type:
Deep Vee

Dimensions & Weight

14.00 ft
14 ft - 4.27 meter
6 ft 7 in - 2.01 meter
Draft - max:
Bridge Clearance:
Dry Weight:
246 lbs
Deadrise Aft:

Optional Engine

Engine Type:
Drive Type:
Fuel Type:

Tank Capacities

Fuel Tank:
Fresh Water Tank:
Holding Tank:


Total Cabins:
Total Berths:
Total Sleeps:
Total Heads:
Captains Cabin:
Crew Cabins:
Crew Berths:
Crew Sleeps:
Crew Heads:



Standard Equipment

Deep “V” Marine Grade Aluminum Hull
Heavy Duty Transom Knee
Stringer System Welded Under Aluminum Deck
Non-Skid Rubber Floor Panels
Plastic External Transom Plate
Aluminum Internal Transom Plate
Aluminum Bow Eye
3-4 Aluminum Davit Lifting Points
AluminumTransom Tie Down & Towing Rings
Aluminum Bow Tie Down & Towing Rings
Deck Drain with Plug
Orca (CSM) Five Layer Coated Fabric
Raised Double Rub Rail
Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
1 Front & 4 Side Orca (CSM) Fabric Handles on Tubes
2 Inside Bow Sets of Triple Orca (CSM) Fabric Handles on Tubes
2 Inside Stern Double Orca (CSM) Fabric Handles on Tubes
Paddles with Aluminum Shaft
Paddle Holders
Hand Pump
Maintenance Kit
Owner's Manual
3 Layers Reinforced Seams
Rubber Protector on Full Length of Keel

Optional Equipment

Bow Locker/Seat
Tube Chaps
Boat Cover
Chock Set
Bow Step with Fold Down Stainless Steel Cleat
Lateral Fold Down Stainless Steel Cleat
Fiberglass Console
Fiberglass Console with Forward Seat
Bench Seat with Storage
One Person Jockey Seat
Two Person Jockey Seat
Stainless Steel Helm Unit


Presented by :

1914 Ridge Oak Lane
Knoxville, TN, US